It is the Epson printer is not connected to the WiFi is a problem that typically occurs when the drivers for the printer aren’t up-to-date. This can also occur when the printer isn’t within the area that the wireless network can reach.
If you own the Epson printer that isn’t connecting with your network wirelessly, you’re in the right spot. This article will provide you with access to the most effective techniques and tips to aid in solving these issues.
If the network is secured by a password, your computer won’t be able to access the printer until you have entered the correct password.
Epson printer is among the top printers available and is employed in offices, schools as well as colleges, and everywhere and everywhere else. There are occasions that you may encounter issues, for instance, Epson printer repair Dubai.
Don’t worry as we will assist with your concerns. We’ll give you instructions that can assist to solve the issue. When you discover that your Epson Printer won’t connect to WiFi and you are unable to connect, you can learn some useful troubleshooting suggestions in this article. how eliminate kodak printer error code
If you are experiencing issues or problems with your printer, such as the printer is not working or paper jamming or wireless network problems and hardware or software issues, or any other issues. Check out this write-up. In this article, we will explain how to fix the issue.
Let’s find out some of the reasons that people are having these issues.
Reasons for the Epson Printer not Connecting to WiFi:
- The Wi-Fi password could have been wrong.
- This printer attempts to link to the Wi-Fi network, connecting to the Wi-Fi network using an old profile.
- If the connection to the network is not strong, it will cause this problem.
- The printer will require an upgrade to the firmware
- If your firewall blocks the printer, it refuses to allow the printer to connect to the network.
These are a few reasons that could make the problem persist. If you’re seeking to fix the issue, you have to read our troubleshooting guide.
A few tips prior to the troubleshooting guide
- Be sure it is that the Epson printer is near the Wi-Fi router or extender to ensure that there is no interruption in the connection.
- Be sure you are sure of the password you used.
- Also, make sure the router is transmitting the most reliable Wi-Fi signals.
- Then, go through the WLAN settings of the Epson printer and check whether the signal quality is good on the Wi-Fi.
Troubleshooting procedures for The Epson Printer not Connecting to WiFi:
Factory resets your WLAN configurations:
If the Epson printer isn’t connected to the Wi-Fi network following resetting the wireless duration, it could be trying to reconnect to the Wi-Fi network by using the password of the previous one.
What you need to do is reset the wireless settings on the printer following the steps in the following order:
- The first thing you have to do is power up the Epson machine, and then just wait until you have an initial home screen.
- Then press the setup button, which is accessible at the”fax” button. For some printers, it may be in a different spot.
- Then, find the restore default settings, and then hit it.
- The next step is to select the reset network settings button, and then accept the window that prompts you. contact printer repair Sharjah.
If you notice that the reset network is completed, you have to go back to your home page by pressing your home button. You must now connect to connect the Epson wireless printer with Wi-Fi.
If the issue persists the issue is not resolved, you should proceed to your next steps.
Interferences caused by different devices
If other devices switch on at the same time as your printer, they could block it from connecting on the network. If wireless devices try to connect to this network the network is likely to be overwhelmed.
In the end, it won’t be able to connect to an internet connection. The only thing you’ll need to do is switch to a different network with strong signal strength. Find the connections that are available and then select the other connections.
Then connect the printer to the computer, and then verify that you are able to connect it on online connectivity or not.
Configuring and configuring your Epson printer
If you discover that the IP address of your printer isn’t matching the IP address of your network you’re bound to be confronted with an Epson Printer Is not responding issue. To resolve it you’ll need to change the configuration of the Epson printer and then correct the issue.
Step1:
The first thing you have to do is open the network settings, and then check your printer’s IP addresses match. the printer has changed.
Access the control panel, and then click on printers and devices. After selecting the printer, remove it.
Step2:
Once you have done that, you are able to select the printers and devices from the menu at the top and then click add the printer. Once you have done that, select the option to add an existing local printer in the Add a Printer wizard.
Step3:
If you notice the new window appear it is important to ensure you select the option of suggesting the port of your printer and then using an existing port is be selected. Then, select the option next to get to the driver page for your printer.
Step4:
Choose the printer’s manufacturer and model number of the printer. Press the next button.
If you’re not able to locate your printer model in the list, you need to select the option to update windows to let windows search for additional drivers.
Step5:
When Windows will identify the appropriate drivers you must hit the Install button.
You must restart both your computer as well as the printer to ensure that you do not have the issue of your Epson printer not connecting via WiFi anymore!
Here are a few solutions to help you resolve the problem. If you’re still struggling with this issue and feel helpless the experts at Epson Printer Offline will provide you with the ideal resolution!
