The steps to install the truck tailgate are as follows:
1. Prepare tools and materials
– Truck tailgate kit
– Screwdriver
– Wrench
– Electric drill (if necessary)
– Measuring tools (tape measure, level)
– Gloves and safety glasses
2. Check parts
– Confirm that all parts are complete, including the tailgate, bracket, screws, etc.
3. Locate the installation position
– Determine the installation position of the tailgate, ensure that it is aligned with the cargo box, and mark the fixing points.
4. Install the bracket
– Install the bracket according to the instructions to ensure that it is level and stable.
5. Fix the tailgate
– Place the tailgate on the bracket, adjust the position, and fix it with screws.
6. Adjust and check
– Check whether the tailgate opens and closes smoothly, and adjust if necessary.
7. Complete the installation
– Confirm that all screws are tightened and the tailgate is firmly installed.
Precautions
– Follow the instructions strictly.
– Ensure that the installation is firm and avoid looseness.
– If you are unsure, it is recommended to seek professional help.
Tips
– The installation steps for different models may be slightly different. Please refer to the installation guide for the specific model.
After installation, ensure that the rear cover functions properly to ensure driving safety.
The steps for maintaining the rear cover of a tri-fold truck are as follows:
1. Regular cleaning
Cleaning frequency: It is recommended to clean at least once a month.
Cleaning method: Use mild soapy water or special detergent, avoid using strong acid and alkali detergents.
Cleaning tools: Soft cloth or sponge, avoid using hard brushes to prevent scratching the surface.
2. Check the sealing strip
Inspection frequency: Check once every quarter.
Inspection content: Make sure that the sealing strip is free of cracks, aging or falling off.
Maintenance measures: If damage is found, replace it in time.
3. Lubricate moving parts
Lubrication frequency: Lubricate once every six months.
Lubrication parts: hinges, slide rails, etc.
Lubricant selection: Use special lubricants or silicone oil.
4. Check screws and fixings
Inspection frequency: Check once every quarter.
Check content: Make sure that the screws and fixings are not loose or missing.
Maintenance measures: If looseness is found, tighten or replace them in time.
5. Prevent corrosion
Protective measures: Avoid long-term exposure to humid or high-salt environments.
Treatment method: If rust is found, clean it in time and apply anti-rust agent.
6. Regularly check the overall condition
Inspection frequency: Perform a comprehensive inspection every six months.
Check content: Whether the back cover opens and closes smoothly, and whether there is any deformation or damage.
Maintenance measures: If problems are found, repair or replace them in time.
7. Avoid overloading
Note: Avoid the back cover from bearing a weight that exceeds its designed load.
Maintenance measures: Reasonably distribute the weight of the cargo to avoid excessive pressure on the back cover.
In case of complex problems or failures that cannot be solved by yourself, it is recommended to seek help from professionals. OSIAS’s tri fold tonneau cover can meet your needs and bring you a good use experience.
Related Products
